Experimental and computational studies of intracomplex reactions in Mg+(primary, secondary alkylamine) complexes induced by photoexcitation of Mg+

We report herein a comprehensive study of photoinduced reactions in complexes of Mg+ with primary (n-propyl- and isopropylamine) and secondary amines (dipropyl- and diisopropylamine) in the spectral range of 230-440 nm. Similar to the methyl- and ethylamine complexes studied previously, N-H bond activation of these complexes is very unfavorable. Instead, the C(alpha)-C, C-N, and C(alpha)-H bond-cleavage photoproducts are observed after photoexcitation of the Mg+ complexes (3(2)P<--3(2)S). For Mg+(primary amine) complexes, for example, Mg+-NH2CH2CH2CH3, and Mg+-NH2CH(CH3)2, the photoproducts resulting from C(alpha)--C rupture prevail after P(z) and charge-transfer excitations, whereas the Mg+ photofragment is predominant upon P(x,y) excitation. However, with further N-alkyl substitution, as in Mg+(secondary amine) complexes, for example, Mg+-NH(CH2CH2CH3)2 and Mg+-NH[CH(CH3)2]2, a novel intracomplex C-C coupling photoreaction dominates on P(x,y) excitation of Mg+, which is believed to arise from Mg+* insertion into the C-N bond. With P(z) and charge-transfer excitation, the Mg-R elimination photoproducts, arising from C(alpha)-C bond cleavage, predominate. The energetics and possible mechanisms of the intracomplex photoreactions are analyzed in detail with the help of extensive quantum mechanics calculations.     

New NIST sediment SRM for inorganic analysis

NIST maintains a portfolio of more than 1300 standard reference materials (SRM), more than a third of these relating to measurements in the biological and environmental fields. As part of the continuous renewal and replacement efforts, a set of new marine sediments has been recently developed covering organic and inorganic determinations. This paper describes the steps taken in sample preparation, homogeneity assay, and analytical characterization and certification with specific emphasis on SRM 2702 inorganics in marine sediment. Neutron activation analysis showed the SRM to be highly homogeneous, opening the possibility for use with solid sampling techniques. The certificate provides certified mass fraction values for 25 elements, reference values for eight elements, and information values for 11 elements, covering most of the priority pollutants with small uncertainties of only several percent relative. The values were obtained by combining results from different laboratories and techniques using a Bayesian statistical model. An intercomparison carried out in field laboratories with the material before certification illustrates a high commutability of this SRM.Electronic Supplementary Material Supplementary material is available in the online version of this article at     

Mixing of electronic states in molybdenum complexes involved in nitrogen activation

The mechanism for nitrogen activation by molybdenum complexes is a complicated one, involving as it does the coupling of a quartet molybdenum reactant with a singlet nitrogen molecule, passing via a series of quartet and doublet encounter complexes to a triplet intermediate, with the subsequent spin crossing to the singlet surface which then leads via a singlet transition state to the final pair of singlet products. We have investigated in detail a variety of levels of theory to describe the crossing of these electronic surfaces and have calculated both lower-bound and actual minimum energy crossing points for the key spin inversion processes.     

四氢呋喃-水-乙醇三元溶液体系制备高合金化Pt-Ru/CMK-3催化剂

提出了在四氢呋喃(THF)、H2O和乙醇三元体系中用一般的化学还原法在室温下制备高合金化Pt-Ru/CMK-3催化剂的新方法. 与在纯水中制得的商品化ETEK催化剂相比, 其Pt-Ru粒子的合金化程度高、平均粒径较小且相对结晶度低, 因此, 该催化剂对甲醇氧化的电催化活性远高于在纯水中制得的Pt-Ru催化剂. 高合金化程度的原因是H2PtCl6和RuCl3在THF、H2O和乙醇三元溶液体系中的起始还原电位相近. 此外, CMK-3以其规整的二维有序孔道结构, 为直接甲醇燃烧电池(DMFC)中电子和物质的传输提供了方便的路径, 其巨大的比表面积也为Pt-Ru 纳米粒子的均匀分散提供了良好的载体.     

Variational transition state theory without the minimum-energy path

In this paper we propose a method for carrying out variational transition state theory calculations without first obtaining a converged minimum-energy path (MEP). We illustrate the method in two ways, first of all by employing an unconverged MEP and secondly by using a dynamically optimized distinguished reaction path. Preliminary tests of the algorithm for the reactions OH+H₂→H₂O+H and C₂H₅→C₂H₄+H are very encouraging. Received: 22 January 1997 / Accepted: 11 March 1997     

钒氧阴离子团簇与小分子碳氢化合物反应的实验和理论研究

为了在分子层次上揭示相关催化反应的机理, 人们对过渡金属氧化物团簇与碳氢化合物分子反应进行了大量研究. 相比于过渡金属氧化物团簇阳离子, 阴离子对一些碳氢化合物的活性弱得多, 因此研究还很少. 在本工作中, 我们通过激光溅射产生钒氧团簇阴离子VxOy, 产生的团簇在接近热碰撞条件下与烷烃(C2H6和C4H10)以及烯烃(C2H4和C3H6) 在一个快速流动反应管中进行反应, 飞行时间质谱用来检测反应前后的团簇分布. 在VxOy与烷烃的反应中, 生成了产物V2O6H-和V4O11H-; 在与烯烃的反应中, 产生了相应的吸附产物V4O11X-(X=C2H4或C3H6). 密度泛函理论计算表明: V2O-6和V4O-11可以活化烷烃(C2H6和C4H10)的C—H键, 也可以与烯烃(C2H4和C3H6)发生3+2环化加成反应形成一个五元环结构(-V-O-C-C-O-), C—H键活化与环加成反应都需经历可以克服的反应能垒. 理论计算与实验观测结果相符合. V2O-6和V4O-11团簇都具有氧原子自由基(O·或O-)的成键特征, 活性O-物种也经常出现在钒氧催化剂表面, 因而本研究在分子水平上, 揭示了表面活性氧物种与碳氢化合物反应的机理.     

Diels—Alder reaction. Effect of internal and external factors on the reactivity of diene—dienophile systems

The key factors influencing the Diels—Alder reaction rate at ambient and elevated pressures were elucidated using data on the reactivity of various diene—dienophile systems in usual and Lewis acid-catalyzed Diels—Alder reactions, the reaction enthalpy, complex formation, dissolution, and solvation, and the donor-acceptor properties of the reactants. It was found that taking account of both the orbital interaction energy and the balance of bond rupture and formation energies allows correct prediction of the reaction rate in the absence or in the presence of Lewis acids.     

Using ordinary differential equations system to solve isoconversional problems in non-isothermal kinetic analysis

The mathematical evaluation of the activation energy, E, of non-isothermal degradation reactions is usually made using the Ozawa/Flynn–Wall isoconversion principle and involves the numerical resolution of a set of integrals without closed form solution, which are solved by polynomial approximation or by numeric integration. In the present work, the isoconversion principle, originally described and maintained until now as an algebraic problem, was written as a set of ordinary differential equations (ODEs). The individual ODEs obtained are integrated by numeric methods and are used to estimate the activation energy of simulated examples. A least square error (LSE) objective function using the introduced ODEs was written to deal with multiple heating rate CaCO₃ thermal decomposition TG experiments.     

An attempt on the VOC oxidation using mechanically activated catalyst

A catalytic action of the mechanochemical products of copper hydroxocarbonate with calcium carbonate was investigated in n-butyl alcohol oxidation tests. The solid products of high-energy milling were identified using thermogravimetry supplemented by X-ray diffraction method. It was shown that the mechanical activation induces more effective tested catalyst because it promotes the alcohol conversion at lower temperatures than that unmilled one. This revised version was published online in July 2006 with corrections to the Cover Date.